V309 Fuel Injector Testing and Cleaning Machine integrates ultrasonic cleaning with microcomputer-controlled hydraulic pressure testing technology. It simulates multiple engine operating conditions and supports cleaning and testing of high-pressure EFI/FSI/GDI injectors as well as standard injectors, compatible with 98% of vehicle models.
MRCARTOOL V309 Fuel Injector Tester and cleaning machine combines ultrasonic cleaning with microcomputer-controlled oil pressure for detection. It simulates various engine conditions to clean and inspect high-pressure EFI/FSI/GDI injectors and standard injectors, compatible with 99% of vehicles.
4 Large Cylinders & 1300ml Tank Capacity: V309 Fuel Injector Tester kit equipped with 140ml-capacity cylinders, directly check GDI/standard injectors’ bad or good situation. Powerful ultrasonic cleaning capacity, support to clean or test 4 injectors simultaneously at most.
9 Testing Functions: The injector cleaner machine supports nine test functions: Idle Speed, Medium Speed, High Speed, Accelerating, Variable Speed, Leakage, and three Spray Volume tests. In addition, the ultrasonic cleaning function is devoted to fast injector cleaning without any damage.
Smart Operation Panel: The digital control panel allows one-button start/stop and lets users adjust the test time, working frequency, fuel injection times, and shortest switching period within the allowable range. 12V/70V/120V voltages to meet your different needs. All can be done by one person, saving time and energy.
GARANZIA: MRCARTOOL offre una garanzia di 24 mesi e un servizio clienti cordiale 7×24 ore per garantire la vostra esperienza di acquisto.
Candela di Cleanning.Put candela nel serbatoio di pulizia, input fluido pulito e iniziare pulito
Verifica dell'iniezione dell'iniettore in diverse situazioni, controllo delle perdite e dei blocchi
Pulizia dell'iniettore senza smontaggio (è necessario un accessorio extra e un costo aggiuntivo, da scegliere autonomamente)
Pulizia della valvola a farfalla senza smontaggio. (è necessario un accessorio extra e una tassa extra, da scegliere da soli)
La funzione di pulizia e test è compatibile solo con gli iniettori HONDA, YAMAHA, SUZUKI e SANYANG e richiede accessori e costi aggiuntivi scelti dall'utente.
How to test fuel injectors with V309 Fuel Injector Tester?
Pulire l'esterno dell'iniettore con un liquido prima dell'uso. Dopo aver rimosso lo sporco, inserire gli iniettori nel bagno a ultrasuoni, assicurandosi che il fluido non superi la porta di connessione della linea di impulso.
Accendere il sistema a ultrasuoni per consentire all'energia ultrasonica di rimuovere eventuali accumuli di particelle all'interno degli iniettori. Dopo la pulizia, riciclare il liquido di pulizia rimanente.
Fissare gli iniettori sulla macchina principale e verificarne la resistenza, i cortocircuiti e l'assorbimento di corrente. Aggiungere il liquido di prova a metà della provetta di vetro.
Stiamo eseguendo test di tenuta, valutazioni del modello di spruzzatura e test di portata sul banco di flusso. I tecnici hanno riportato gli iniettori al banco di flusso per testare nuovamente tutte le funzioni.
9 recensioni per MRCARTOOL V309 Fuel Injector Tester Direct Injection
5,0
Basato su 9 recensioni
5 stelle
100
100%
4 stelle
0%
3 stelle
0%
2 stelle
0%
1 stella
0%
Valutato 5 su 5
Nona Wolff -
good service good quality
(0)(0)
Valutato 5 su 5
Shaina Emard -
Excellent product, very good attention
(0)(0)
Valutato 5 su 5
Bernice Brown -
Cleaning is efficient and fast. Most of the injectors in our workshop can be cleaned, the quality is very good, saves us a lot of time and cost, we highly recommend this product!
(0)(0)
Valutato 5 su 5
Tracy Renee -
Worth every penny! Ultrasonic cleaner and back flushing features are great. Highly recommend this machine.
(0)(0)
Valutato 5 su 5
Joanne Ferdinand -
I put it through all of its functions. We pulled 2 fuel rails from a yard for our stock car. The V309 cleaned, tested each one. The volume cylinders are clear and well lit. The fittings were tight and we had NO leaks. Definitely worth every penny.
(0)(0)
Valutato 5 su 5
Mirabelle Lucia -
This fuel injector cleaner/tester works well right out of the box. Ultrasonic cleaner is fairly large at around 1200 ml and has decent depth for cleaning a variety of parts. It is not heated, though. I used the A-Team Ultrasonic Carburetor Cleaner from Amazon as a cleaning solution and used Isopropyl alcohol at 92% for the test fluid. Cleaned and tested 8 injectors first day taking 4 at a time through each test. Several injectors were bad to start so I ran through several ultrasonic cleaning cycles, removed the screens, and reverse flushed before testing. What’s really nice is the number of fittings supplied with this set. In this case, the fittings for reverse flush were a different than size than for testing. While this accommodates injectors of various voltages, it also allows you to adjust the pressure to your operational needs. The results were an awesome aerated spray pattern on each with similar flows across all injectors (within 2ml). One thing to note is never use anything corrosive as a test fluid as it will destroy the pump and seals very quickly. The manufacturer recommended the alcohol which worked well for me especially since test fluid is difficult to actually procure. If you can find it, it tends to be very expensive. If using on injectors for every day drivers, alcohol as a test fluid is fine.
(0)(0)
Valutato 5 su 5
Smith -
Recommended, you can visually check if the injector is working properly, and it’s very interesting to test the fluid recovery, very good product!
(0)(0)
Valutato 5 su 5
Jessica T -
I was pleasantly surprised by the cleaning results, they were great. You can test and clean 4 injectors at a time, or just clean fewer if you want to plug other ports on the fuel rail.
It’s easy to use and doesn’t take up much space in your garage or shop.
Perfect for automotive enthusiasts, entrepreneurs or repair shops to save money and make money.
The ultrasonic tank does a great job of breaking down fuel, carbon and dirt. The test unit also removes scale buildup.
You can install the injectors with confidence that they will work and flow properly. This is helpful for verifying new injectors and checking the balance between injectors. Or get your old injectors back in tip-top shape. You can observe injection patterns at different pressures and simulated RPMs.
It’s definitely a lot of fun in the store.
(0)(0)
Valutato 5 su 5
Daniel -
The price is fantastic, and the product quality is outstanding. The online support team was incredibly attentive in resolving my concerns. Feel free to purchase with confidence!! This is undoubtedly the best investment you can make for your workshop.
Nona Wolff -
good service good quality
Shaina Emard -
Excellent product, very good attention
Bernice Brown -
Cleaning is efficient and fast. Most of the injectors in our workshop can be cleaned, the quality is very good, saves us a lot of time and cost, we highly recommend this product!
Tracy Renee -
Worth every penny! Ultrasonic cleaner and back flushing features are great. Highly recommend this machine.
Joanne Ferdinand -
I put it through all of its functions. We pulled 2 fuel rails from a yard for our stock car. The V309 cleaned, tested each one. The volume cylinders are clear and well lit. The fittings were tight and we had NO leaks. Definitely worth every penny.
Mirabelle Lucia -
This fuel injector cleaner/tester works well right out of the box. Ultrasonic cleaner is fairly large at around 1200 ml and has decent depth for cleaning a variety of parts. It is not heated, though. I used the A-Team Ultrasonic Carburetor Cleaner from Amazon as a cleaning solution and used Isopropyl alcohol at 92% for the test fluid. Cleaned and tested 8 injectors first day taking 4 at a time through each test. Several injectors were bad to start so I ran through several ultrasonic cleaning cycles, removed the screens, and reverse flushed before testing. What’s really nice is the number of fittings supplied with this set. In this case, the fittings for reverse flush were a different than size than for testing. While this accommodates injectors of various voltages, it also allows you to adjust the pressure to your operational needs. The results were an awesome aerated spray pattern on each with similar flows across all injectors (within 2ml). One thing to note is never use anything corrosive as a test fluid as it will destroy the pump and seals very quickly. The manufacturer recommended the alcohol which worked well for me especially since test fluid is difficult to actually procure. If you can find it, it tends to be very expensive. If using on injectors for every day drivers, alcohol as a test fluid is fine.
Smith -
Recommended, you can visually check if the injector is working properly, and it’s very interesting to test the fluid recovery, very good product!
Jessica T -
I was pleasantly surprised by the cleaning results, they were great. You can test and clean 4 injectors at a time, or just clean fewer if you want to plug other ports on the fuel rail.
It’s easy to use and doesn’t take up much space in your garage or shop.
Perfect for automotive enthusiasts, entrepreneurs or repair shops to save money and make money.
The ultrasonic tank does a great job of breaking down fuel, carbon and dirt. The test unit also removes scale buildup.
You can install the injectors with confidence that they will work and flow properly. This is helpful for verifying new injectors and checking the balance between injectors. Or get your old injectors back in tip-top shape. You can observe injection patterns at different pressures and simulated RPMs.
It’s definitely a lot of fun in the store.
Daniel -
The price is fantastic, and the product quality is outstanding. The online support team was incredibly attentive in resolving my concerns. Feel free to purchase with confidence!! This is undoubtedly the best investment you can make for your workshop.