Guía de uso del cargador de coche eléctrico MRCARTOOL
Tammy
noviembre 20, 2024
The popularity of electric vehicles makes electric vehicle chargers an indispensable device in daily life, but in the actual use process, users will inevitably encounter some questions or technical problems. To this end, the MRCARTOOL team has collated the most common problems in customer feedback and provided detailed solutions, hoping to help everyone easily get started and enjoy an efficient charging experience.
Cargador de coche eléctrico Precauciones de instalación
This product must be installed by individuals who are trained and qualified to work with electrical systems.
Incorrect installation or testing of this product may damage the vehicle’s battery or the AC charging station. Such damage is not covered under the warranty.
Before installation, ensure that the foundational equipment meets the necessary requirements, including dedicated wiring and an air switch. The product must be installed in the pre-designated location.
Avoid installing this product near flammable, explosive, or combustible materials, as well as chemicals.
Always turn off the power on the circuit breaker before starting the installation process.
By following these precautions, you can ensure a safe and efficient installation process.
Electric Vehicle Chargers APP Connection Tutorial
1. App download and installation
Scan the QR code to install the app
Note: The MRCARTOOL S311 Electric Vehicle Charger has a difference between the upgrade version and the basic version, and the basic version has no APP function
2. Adding the device
Press the emergency stop switch, then turn the knob within 5 seconds to release the switch, putting the device into network configuration mode.
Connect the phone to the WlF network and enable Bluetooth.
Open the app, click on “Add Device,” and wait for device detection.
After successful detection, add the device and input the WlFl name and password, then wait for successful device addition.
EV Charger Reset Password Tutorial
Press the red emergency stop switch.
Power off and restart.
Enter the “Set New Password” interface, where users can reset their passwords.
Resumen
MRCARTOOL electric vehicle chargers are not only stable in performance and easy to operate, but also have always-on after-sales support. Whether it is installation problems, APP usage, or forgotten passwords, we provide detailed solutions and support resources. I hope that through this article, you can use our charging pile equipment more easily.
If you have more questions, please feel free to contact the MRCARTOOL customer service team or visit our official website.
Thank you for your feedback. Please carefully review the usage precautions, follow the steps provided, or contact our online support for assistance.
Precautions for Adding Devices:
0. Power off for 10 seconds before powering back on.
1. Use 2.4GHz Wi-Fi (5GHz is incompatible). Ensure your phone can connect to Wi-Fi and the internet near the device.
2. Press and release the red emergency stop switch within 1 second.
3. Before opening the app, enable both Bluetooth and location services.
4. If no Wi-Fi is available on-site, use one phone to create a Wi-Fi hotspot. Connect another phone to this hotspot before attempting to add the device via the
Thank you for your feedback. Certainly, you may obtain the link to the app through customer service or review the following precautions and switch to plug-and-play mode.
Precautions for Adding Devices:
0. Power off for 10 seconds before powering on again.
1. Use 2.4GHz Wi-Fi (not compatible with 5GHz). Ensure your phone can connect to Wi-Fi and the internet near the device.
2. Press and release the red emergency stop switch within 1 second.
3. Before opening the app, enable both Bluetooth and location services.
4. If no Wi-Fi is available on-site, use one phone to create a Wi-Fi hotspot. Connect another phone to this hotspot before attempting to add the device via the app.
If you have questions about the steps, please contact online support.
4 thoughts on "MRCARTOOL Electric Car Charger Usage Guide"
No sé identifica el Bluetooth del cargador en el teléfono
Se pone buscar en el teléfono y no lo encuentra
Thank you for your feedback. Please carefully review the usage precautions, follow the steps provided, or contact our online support for assistance.
Precautions for Adding Devices:
0. Power off for 10 seconds before powering back on.
1. Use 2.4GHz Wi-Fi (5GHz is incompatible). Ensure your phone can connect to Wi-Fi and the internet near the device.
2. Press and release the red emergency stop switch within 1 second.
3. Before opening the app, enable both Bluetooth and location services.
4. If no Wi-Fi is available on-site, use one phone to create a Wi-Fi hotspot. Connect another phone to this hotspot before attempting to add the device via the
I don’t have wifi by my garage. Can I operate my Ev charger without it., model mrcartool 311
Thank you for your feedback. Certainly, you may obtain the link to the app through customer service or review the following precautions and switch to plug-and-play mode.
Precautions for Adding Devices:
0. Power off for 10 seconds before powering on again.
1. Use 2.4GHz Wi-Fi (not compatible with 5GHz). Ensure your phone can connect to Wi-Fi and the internet near the device.
2. Press and release the red emergency stop switch within 1 second.
3. Before opening the app, enable both Bluetooth and location services.
4. If no Wi-Fi is available on-site, use one phone to create a Wi-Fi hotspot. Connect another phone to this hotspot before attempting to add the device via the app.
If you have questions about the steps, please contact online support.