Walnussschalen-Sandstrahler Motorreinigungsmaschine-AUTOOL HTS558

SKU: MCD13005

Ursprünglicher Preis war: $389.00Aktueller Preis ist: $328.00.

  • Intake Manifold Cleaning: Uses Walnut Shell Sand Blaster to clean the intake manifold and intake/exhaust valves sequentially, effectively removing carbon deposits without damaging the engine.
  • Mehrere Adapter: Equipped with 5 adapters, supporting a wide range of vehicle models.Online-Unterstützung>>

Schneller Versand innerhalb von 48 Stunden

Zwei Jahre Garantie, kostenlose Ersatzteile

AUTOOL HTS558 Walnut Shell Sand Blaster​  features a 1200W motor that provides strong suction power, using physically harmless walnut shells for cleaning. It separates carbon deposits from the walnut shells through a filter, ensuring the shells are reusable. An external air compressor provides powerful sandblasting effects, effectively cleaning the intake manifold and valves, and helping the engine restore optimal performance.

📝Warme Tipps
  • AUTOOL HTS558 Walnut Shell Sand Blaster​ is a special machine for the engine Intake pipe and intake valve back side.
  • Close the intake valve, then spray walnut powder into the engine intake via air pump(not included), meanwhile, HTS558 will recycle walnut powder by vacuum.
  • Dies ist ein geschlossener Kreislauf. Das Walnusspulver wirkt auf die Kohlenstoffablagerungen an der Innenwand des Ansaugrohrs ein. Nach Tausenden von Aufschlägen sind die Kohlenstoffablagerungen gründlich entfernt.
  • Ein chemisches Reinigungsmittel lässt das Rohr korrodieren und verkürzt die Lebensdauer des Motors.
  • Walnusspulver ist ein rein natürliches Poliermittel. Es zeigt hohe Leistung in Härte, Anti-Druck und Verschleißfestigkeit.
  • Die Härte des Walnusspulvers war geringer als die des Metalls, aber höher als die der Kohlenstoffabscheidung. Nehmen Sie diese Vorteile,
  • AUTOOL HTS558 Walnut Shell Sand Blaster​ will clean the intake pipe and back side of the intake valve thoroughly but with no damage
  • Das hochpräzise Motorsystem ist empfindlich gegenüber Fremdkörpern im Ansaugrohr, wie z.B. das BM-W Valvetronic System.
  • That is why we need AUTOOL HTS558 to clean the carbon deposition in the intake pipe. The engine should be closed before cleaning, then turn the crankshaft to close the intake valve. AUTOOL HTS558 cleans one intake pipe each time, and the 6-cylinder engine should cleaned 6 times one by one(and so on).
  • AUTOOL HTS558 is special for the intake pipe and intake valve back side clean only, if you want to clean carbon deposition on the injector/throttle valve/cylinder, Bitte klicken Sie hier, um Injektorreiniger zu bestellen.
  • Das Paket enthält nicht enthalten Walnuss-Sand und einer Hochdruck-Luftpumpe.
  • Walnusspulverreste im Ansaugrohr zerfallen bei hoher Temperatur nach dem Anlassen des Motors zu Asche.

AUTOOL HTS558 Walnut Shell Sand Blaster​​ Features

Eigenschaften
  • Deep removal of carbon deposits: Deeply removes the highly sticky carbon deposits on the intake manifold, intake & exhaust valves. (Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.
  • External air source: Engine Clean Machine​ enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
  • Built-in dust filter: Engine Clean Machine​ can separate the recovered walnut sand grit from carbon deposits for recycling.
  • Integrated design: The walnut sand grit can be sprayed and recovered simultaneously.
  • Multiple adapters: Equipped with 5 kinds of adapters
  • Kundendienst: MRCARTOOL bietet eine 48-monatige Garantie und 7×24 Stunden freundlichen Kundenservice, um Ihr Einkaufserlebnis zu gewährleisten. Wenn Sie Fragen zu EVAP-Leck-Detektoren haben, kontaktieren Sie uns bitte direkt.
Online-Support

How To Use the AUTOOL HTS558 Walnut Shell Sand Blaster?

Betriebsverfahren
  • Schritt 1: Open the headcover of  AUTOOL HTS558 Engine Clean Machine​ and pour it into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close the cover.
  • Schritt 2: Verbinden Sie die Mündung der Spritzpistole und den Recyclingschlauch miteinander. (der Recycling-Schlauch hat ein Loch)
  • Schritt 3: Remove the intake manifold of the engine, plug the spray gun into the intake, and turn the crankshaft to close the intake valve. Then connect the high-pressure air pump((not included)) to HTS558.
  • Schritt 4: Schließen Sie das Gerät an das Stromnetz an und starten Sie die Reinigung. Der Vorgang sollte 1-3 Minuten dauern (je nach den Umständen der Kohlenstoffablagerung).
  • Schritt 5: Close AUTOOL HTS558, and check the cleaning result. Normally the walnut powder can be reused 5-10 times. (depending on carbon deposition circumstances)

Packliste :

Gewicht 10 kg
Schiff von

, , ,

Spannung

,

Lieferung

Kundenrezensionen

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
r
roger w.
Authentic 100% AUTOOL Walnut Shell Sand Blaster

The price was lower, so I bought it with a try-it attitude. In fact, what I received was a 100% AUTOOL device with complete accessories and reliable quality. Just in repair a diesel engine with complete crap in the manifold and channels of intake valves, spent about an hour of time on 8 channels. I recommend the equipment, it pays off quickly in two or three cars

L
Liam
Recommended HTS558

Product arrived in good condition, complete accessories, customer service is also very careful, worth buying a store

J
Jessica T.
Recommended machine!

Cleans very well and will repurchase again

S
Simon K.
surprised

Works great at cleaning carbon off valves. Makes them like new again. Easy machine to set up and use

Walnussschalen-Sandstrahler Motorreinigungsmaschine-AUTOOL HTS558
Walnussschalen-Sandstrahler Motorreinigungsmaschine-AUTOOL HTS558
Ursprünglicher Preis war: $389.00Aktueller Preis ist: $328.00.

Erhalten Sie Ihren exklusiven Rabatt $5!